The Crown Royal Difference
 

Consumers have a wide range of outdoor stoves to choose from. Are you comparing all the features and advantages before deciding to buy? Before making that decision, please check out the CROWN ROYAL difference.

20 YEAR LIMITED WARRANTY - Some outdoor stove manufactures offer little to no warranty and are usually limited to 10 years. CROWN ROYAL offers a 20 year limited warranty on ALL stoves we manufacture.

TYPE 409 TITANIUM ENHANCED STAINLESS STEEL (PRODUCED 100% IN USA MILLS) – 409 Titanium Enhanced 10 Gauge Stainless Steel is superior to mild steel and others stainless steel grades in terms of thermal expansion properties, along with better corrosion resistance than mild steel. Every sheet of 409 stainless received is traceable by the provided mill test report through the manufacturing process to each one of our stoves by serial number. Competitors using imported stainless with lower quality control standards can result in varying wall thickness, heavy inclusions from rolling, lamination and inconsistent annealing. These variables can all lead to excessive corrosion, material failures and leaks in the firebox and water jacket. Competitors using mild steel need at least 3/8” or ½” to get the same corrosion control and by doing that they lose heat transfer efficiency.

FULLY ENCLOSED OUTDOOR STOVES - All CROWN ROYAL outdoor stoves are fully enclosed. Many manufacturers do not have floors which results in rodents and other animal problems that will damage the stove, wiring, and R Value of the furnace. ***Excludes Indoor Units

RESEARCH, DEVELOPMENT, AND TESTING - What better location to develop and test an outdoor stove than International Falls, Minnesota, with the coldest temperatures in the continental United States. All Crown Royal Stoves undergo a 24 hour pressure test after final assembly, before shipment. All manufacturing is performed at our International Falls, Minnesota plant.

EPA APPROVED OUTDOOR STOVES - Along with our complete line of traditional models, CROWN ROYAL has also developed and sells EPA Approved units that fall far below the EPA requirements for smoke emission standards. Currently we have three models to choose from.

INDOOR UNITS - Our indoor units are made with the same high quality standards as our traditional models, but give end users the option to put them inside a garage or barn.

MADE IN THE USA – Crown Royal Stoves and our line of unit heaters and air handlers are fully manufactured at our plant in International Falls, Minnesota. All of our steel comes from mills in the United States.

THE CROWN ROYAL ADVANTAGE – Crown Royal Stoves are designed to be very user friendly & easy to maintain. They have the “ORIGINAL” Shaker Grate System, easy ash removal, pull out ash pan, easy access rear door for seamless installation and maintenance, large firebox door for easy loading of fuel, and heat transfer tubes for more square feet of heating capacity. The stoves are also equipped with a turbo draft system equipped with two blowers – primary and secondary. This system provides the following advantages: burns secondary gases, burns a hotter fire, provides much more heat transfer, higher efficiency, burns less wood, faster heat recovery, less ashes and low smoke emissions. With all of the advantages we have the best performing, highest quality stove on the market. Make sure you are doing research before investing your hard earned dollars into an inferior product and company!